MMC-H Non Contact
+44 (0)345 00 00 400
[email protected]
Menu

MMC-H Coded Magnetic Non Contact

 

IDEM Safety Switches The IDEM MMC-H Hygiecode - Coded Non Contact

The IDEM MMC-H HYGIECODE coded non contact switch has a tolerance of up to 10mm.

Compact yet robust, the IDEM MMC-H is suitable for all small guard applications. Through hole fixing enables front mounting of the MMC-H and provides no food trap areas.

Suitable for CIP SIP cleaning (food contact) or splash zones EHEDG guidelines. With a 10mm wide sensing and cost effective interlock solution the MMC-H can be mounted unobtrusively in channels or behind doors (left or right cable exit).

Safety standards up to PLe ISO 13849-1 SIL 3 EN 62061 Cat 4 EN 954-1

The IDEM MMC-H has 2NC & 1NO circuits with a high switching life and no moving parts.

Tested IP69K (high pressure hosing with detergent at 80C. and 100psi)

 

MMC-H Non Contact Main Features


Standards EN1088 IEC 60947-5-3 EN 60204-1 ISO 13849-1 EN62061 EN 954-1 UL 508
Safety classification and reliability data
Switching reliability 3.3 x 106 operations at 100mA load
EN 954-1 Up to category 4 with safety relay
ISO 13849-1 Up to PLe depending upon system architecture
EN 62061 Up to SIL3 depending upon system architecture
Safety data - Annual usual 8 cycles per hour / 24 hours a day / 365 days
PFHd 2.52 x 10-8
Proof test interval (life) 47 Years
MTTFd 470 Years
Safety Channel 1 NC 24V.dc 0.2A Max. rating
Safety channel 2 NC 24V.dc 0.2A Max. rating
Safety channel 3 NO 24V.dc 0.2A Max. rating
Minimum switched current 10V.dc 1mA
Dielectric withstand 250V.ac
Insulation Resistance 100 Mohms
Recommended setting gap 5mm
Switching distance Sao 8mm close
Target to target Sar 12mm open
Tolerance to misalignment 5mm in any direction from 5mm setting gap
Switching frequency 1.0Hz minimum
Approach speed 200mm/m to 1000mm/s
Body material Stainless steel 316 Mirror polished finish (Ra4)
Temperature Range -25 + 105C
Enclosure Protection IP69K IP67
Shock resistance IEC 68-2-27 11ms 30g
Vibration resistance IEC 68-2-6 10-55 Hz 1mm
Cable type PVC 6 or 8 core 6mm O.D
Mounting bolts 2 x M4 Tightening torque 1.0 Nm
Mounting position Any

For more information about IDEM MMC-H coded non contact HYGIDECODE Switches, contact More Control on 0345 00 00 400.

Office Address 

21 Drakes Mews
Crownhill Industrial Estate
Milton Keynes
MK8 0ER

Tel: 0345 00 00 400

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Search Website